1/32nd Saloon Rules 2018
The rear bodywork of Saloon bodies , as fitted to the prototype, must not be omitted. The lower edge of the rear bodywork must not be more than 10 mm above the track across its full width. Cars must have a suitable interior and must carry clearly legible racing numbers in at least two APPROPRIATE places.
No part of the motor, chassis, gears or tyres shall be visible when viewed from above or through the windscreen or windows.
There is no restriction on the type of drive or chassis that may be use
Motor must be Group 12 with single magnets, 0.513 armature, ballrace at can end only and brushes may be shunted.
Magnets may be shimmed, honed and notched for axle clearance.
By order of the committee - Pontefract Slot Car Club.